Piston Rings
Oil Pumps
Valves
Camshafts
Water pumps
Bearings
Gaskets & Seals
Fan Clutch
Lifters & Rocker Arms
Diesel Kits
Pistons
Disc Brake
Blocks
Brake fluid
Drum Brake Shoe
Brake Rotors
Brake Drums
U-Joint
Clutchs
CV Joint & Parts
Hub unit
Differential Parts
Cardan Parts
Ignition System Parts
Transmission Parts
Product Detail
Gm Ford Cluster Gear
No. Parte: #ATDCF1018The Autopar products are validated and designed in our last generation facilities to achieve original equipment specifications, due to, they are subjected to strict quality controls to ensure proper fit and performance. These products can be found with the main wholesalers, distributors and retailers for being a brand that belongs to the family of MORESA, TF VICTOR, FRITEC, TREMEC and RACE. The Autopar brand has as main strengths, the advice and technical support for questions or doubts about our products, such as: functionality, correct installation and application, it also offers technical training, which are theoretical and practical and can be taught in live or virtually. Autopar is a brand that likes to be in direct contact with its users to be aware of their needs. Autopar has a distribution center of approximately 12,000 m2 with more than 7 storage levels, which allows a service level of 95 with delivery times of 24 to 48 hours, thanks to wms and sap technology.
Tren de engranes 48dTR-4050
SKU: #ATDCF1018
Gm Ford Cluster Gear
| Description | Value |
|---|---|
| Position | N/A |
| First Gear Tooth Quantity | 48 |
| Second Gear Tooth Quantity | 32 |
| Third Gear Tooth Quantity | 23 |
| Fourth Gear Tooth Quantity | 15 |
| Fifth Gear Tooth Quantity | 0 |
| Sixth Gear Tooth Quantity | 0 |
| Reverse Gear Tooth Quantity | 15 |
| First Gear Outside Diameter | 146.72 |
| Second Gear Outside Diameter | 123.54 |
| Third Gear Outside Diameter | 92.42 |
| Fourth Gear Outside Diameter | 59.1 |
| Fifth Gear Outside Diameter | 0 |
| Sixth Gear Outside Diameter | 0 |
| Reverse Gear Outside Diameter | 59.1 |
| Input Shaft Length | 382.41 |
| Input Shaft Diameter | 39.97 |
| Input Shaft End 1 Spline Quantity | 30 |
| Input Shaft End 2 Spline Quantity | 0 |
| Output Shaft End 2 Spline Quantity | 0 |
| Output Shaft Length | 0 |
| Output Shaft Diameter | 41.25 |
| Transmission Model | TREMEC LD TR-4050 |
| UM First Gear Outside Diameter | mm |
| UM Second Gear Outside Diameter | mm |
| UM Third Gear Outside Diameter | mm |
| UM Fourth Gear Outside Diameter | mm |
| UM Fifth Gear Outside Diameter | mm |
| UM Reverse Gear Outside Diameter | mm |
| UM Input Shaft Length | mm |
| UM Input Shaft Diameter | mm |
| UM Output Shaft Diameter | mm |
| OE part | TDCF1018 |
| Note | Countershaft |
Also Fits
| Year | BRAND | Model | Submodel | Engine (L) |
|---|