Product Detail
End Yoke Series 1280/1310
No. Parte: #A2-4-2281-1XThe Autopar products are validated and designed in our last generation facilities to achieve original equipment specifications, due to, they are subjected to strict quality controls to ensure proper fit and performance. These products can be found with the main wholesalers, distributors and retailers for being a brand that belongs to the family of MORESA, TF VICTOR, FRITEC, TREMEC and RACE. The Autopar brand has as main strengths, the advice and technical support for questions or doubts about our products, such as: functionality, correct installation and application, it also offers technical training, which are theoretical and practical and can be taught in live or virtually. Autopar is a brand that likes to be in direct contact with its users to be aware of their needs. Autopar has a distribution center of approximately 12,000 m2 with more than 7 storage levels, which allows a service level of 95 with delivery times of 24 to 48 hours, thanks to wms and sap technology.
Nissan np300, d21, 44-60 90-14
SKU: #A2-4-2281-1X
End Yoke Series 1280
Description | Value |
---|---|
Position | N/A |
Centerline of Joint to End of Spline | 3.022 |
Spline Count | 26 |
Spline Major Diameter | 1.144 |
Universal Joint Retaining Width | 3.219 |
Cap Outside Diameter | 1.062 |
Ground Hub Diameter | 1.562 |
Series | 1310 |
Style | Strap Style |
UM Spline Major Diameter | Inches |
UM Universal Joint Retaining Width | Inches |
UM Cap Outside Diameter | Inches |
UM Ground Hub Diameter | Inches |
Centerline of Joint to End of Spline | 1.712 |
UM Centerline of Joint to End of Spline | Inches |
Centerline of Bolt Hole to centerline of joint | 0 |
UM Centerline of Bolt Hole to centerline of joint | 0 |
Centerline of Bolt Hole to End of Hub | 0 |
UM Centerline of Bolt Hole to End of Hub | 0 |
Top of Bolt Hole to Centerline of Spline | 0 |
UM Top of Bolt Hole to Centerline of Spline | 0 |
Center of Bolt Hole to Center of Spline | 0 |
UM Center of Bolt Hole to Center of Spline | 0 |
Shaft diameter | 0 |
UM Shaft diameter | 0 |
Centerline joint to end hub | 0 |
UM Centerline joint to end hub | 0 |
U joint application | A-200X |
Strap kit application | 0 |
UM Length Thru Bore | Inches |
Note | For 1310 series |
Also Fits
Year | BRAND | Model | Submodel | Engine (L) |
---|---|---|---|---|
2009 | Nissan | NP300 | Base | 2.4 L 2389 4 KA24DE DOHC 16 |
2009 | Nissan | NP300 | Base | 2.5 L 2488 4 YD25DDTi DOHC 16 |
2010 | Nissan | NP300 | Base | 2.4 L 2389 4 KA24DEN DOHC 16 |
2010 | Nissan | NP300 | Base | 2.5 L 2488 4 YD25DDTi DOHC 16 |
2011 | Nissan | NP300 | Base | 2.4 L 2389 4 KA24DEN DOHC 16 |
2011 | Nissan | NP300 | Base | 2.5 L 2488 4 Y225DDTi DOHC 16 |
2011 | Nissan | NP300 | Base | 2.5 L 2488 4 YD25DDTi DOHC 16 |
2012 | Nissan | NP300 | Base | 2.4 L 2389 4 KA24DEN DOHC 16 |
2012 | Nissan | NP300 | Base | 2.5 L 2488 4 Y225DDTi DOHC 16 |
2012 | Nissan | NP300 | Base | 2.5 L 2488 4 YD25DDTi DOHC 16 |
2013 | Nissan | NP300 | Base | 2.4 L 2389 4 KA24DEN DOHC 16 |
2013 | Nissan | NP300 | Base | 2.5 L 2488 4 Y225DDTi DOHC 16 |
2013 | Nissan | NP300 | Base | 2.5 L 2488 4 YD25DDTi DOHC 16 |
2014 | Nissan | NP300 | Base | 2.4 L 2389 4 KA24DEN DOHC 16 |
2014 | Nissan | NP300 | Base | 2.5 L 2488 4 Y225DDTi DOHC 16 |
2014 | Nissan | NP300 | Base | 2.5 L 2488 4 YD25DDTi DOHC 16 |